HAM Spiral Drills...
HAM Solid Carbide Spiral Drills are suitable for universal workpieces.
Diameter offerings start at 0.1mm (.0039") to 20.0mm (.7874").
Tools are available coated or uncoated.
Diameter offerings start at 0.1mm (.0039") to 20.0mm (.7874").
Tools are available coated or uncoated.
Titanium
Graphite
Reinforced Composites
Graphite
Reinforced Composites
Ductile/Nodular Iron
Inconel
Haynes
Hastaloy
Inconel
Haynes
Hastaloy
Aluminum
Steel
Stainless Steel
Cast Iron
Steel
Stainless Steel
Cast Iron
Suitable Materials:
HAM 300 / 304 / 310 ⪠Non-Coolant
Engineering Data:
- 4 Facet Ground
- Web Thinning DIN 1412 Form A
- 30° RH Helix
- 2 Flute
- 120° Point Angle
- Diameter Tolerance h7
HAM 313 ⪠Non-Coolant
- 4 Facet Ground
- Web Thinning DIN 1412 Form A
- 30° RH Helix
- 2 Flute
- 130° Point Angle
- Diameter Tolerance h7
- AMS Geometry
HAM 314 ⪠Non-Coolant
- 4 Facet Ground
- Thinning DIN 1412 Form B
- 30° RH Helix
- 2 Flute
- 130° Point Angle
- Diameter Tolerance h7
- AMS Geometry
HAM 30-1301 ⪠Non-Coolant
- 4 High Concentricity
- 4 Facet Ground
- Web Thinning & No Web Thinning
- 30° RH Helix
- 2 Flute
- 130° Point Angle
- Diameter Tolerance m7
- Web & Shank Thickness Reinforced
HAM 342 ⪠Non-Coolant
- Periphery Cutting Edge
- For Fiber Compound Materials
- 30° RH Helix
- 2 Flute
- Kevlar Point
- Diameter Tolerance h7
HAM 322 / 323 / 326 ⪠Non-Coolant
- Web Thinning Standard
- Short & Long Design
- 30° RH Helix
- 3 Flute
- 130° Point Angle
- Diameter Tolerance h7
- 4 Facet Ground
HAM 385 ⪠Non-Coolant
- Shank 1/8" (3.175mm)
- OAL 1-1/2" (38.0mm)
- 30° RH Helix
- 3 Flute
- 130° Point Angle
- Diameter Tolerance h7
HAM 328 ⪠Non-Coolant
- 4 Facet Ground
- Web Thinning DIN 1412 Form A
- 30° RH Helix
- Cutting till Countersinking Step
- 2 Flute
- 120° Point Angle
- Diameter Tolerance h7
- For Machining of Thread Core Holes